GW Instek SFG-2110
DDS Function Generator; Frequency Range 10 MHz; Frequency Resolution: 100 mHz
Search
Manufacturers
DDS Function Generator; Frequency Range 10 MHz; Frequency Resolution: 100 mHz
Features
* DDS Technique and FPGA Chip Design
* Frequency Range : 0.1Hz~4/10MHz
* High Frequency Accuracy : ± 20ppm
* Frequency Resolution : 100mHz
* Low Distortion Sine Wave : -55dBc,0.1Hz~200kHz
* Front Panel Setting Save/Recall with 10 Groups of Setting Memories
* Built-In 9 Digits,150MHz/High Resolution Counter(SFG-2110 Only)
* INT/EXT AM/FM Modulation (SFG-2110 Only)
* LIN/LOG Sweep Mode(SFG-2110 Only)
SFG-2000 Series | SFG-2100 Series | |
Main | ||
Frequency Range (Sine, Square) | SFG-2004 : 0.1Hz ~ 4MHz SFG-2010 : 0.1Hz ~ 10MHz | SFG-2110 : 0.1Hz ~ 10MHz |
Frequency Range (Triangle) | 0.1Hz~1MHz | |
Frequency Resolution | 0.1Hz | |
Frequency Stability | ± 20 ppm | |
Frequency Accuracy | ± 20 ppm | |
Aging | ± 5 ppm /year | |
Output Function | Sine, Square, Triangle | |
Amplitude Range | 2mV~10Vpp(50Ω Load) | |
Impedance | 50Ω±10% | |
Attenuator | -20dB±1dB×2 | |
DC Offset | <-5V~>+5V(50Ω Load) | |
Duty Cycle | 20% to 80%, 2Hz~1MHz (Only Square) | |
Range Resolution | 1% | |
Display | 9 位 LED display | |
SINE WAVE | ||
Harmonics Distortion | -55dBc,0.1Hz~200kHz; -40dBc,0.2MHz~4MHz; -30dBc,4MHz~10MHz (Specification applied to both TTL/CMOS OFF and from MAX. to 1/10 level) | |
Flatness(Relative to 1kHz) | <± 0.3dB,0.1Hz~1MHz; <± 0.5dB,1MHz~4MHz; <± 2dB, 4MHz~10MHz | |
TRIANGLE WAVE | ||
Linearity | ≧98%,0.1Hz~100kHz;≧95%,100kHz~1MHz | |
SQUARE WAVE | ||
Symmetry | ± 1% of period +4ns to 0.1Hz~100kHz | |
Rise or Fall Time | ≦25ns at maximum output.(into 50 load) | |
CMOS Output | ||
Level | 4Vpp±1Vpp~15Vpp±1Vpp adjustable; Rise or Fall Time ≦120ns | |
TTL Output | ||
Level | ≧3Vpp ; Fan out; 20 TTL Load ;Rise and Fall Time ≦25ns | |
SWEEP OPERATION | ||
Rate | - | 100:1 ratio max. and adjustable (In order to get the maximum sweep span, the sweep time needs to be tuned on when adjusting the sweep span.) |
Time | 1Sec~30Sec adjustable (When the sweep time is too long, the stop frequency will reach and stay at the maximum frequency of the instrument until the end of the sweep cycle.) | |
Mode | Lin./Log. switch selector | |
AMPLITUDE MODULATION | ||
Depth & Modulation Frequency | - | 0~100% ; 400Hz(INT), DC~1MHz(EXT) |
Carrier BW | 100Hz~5MHz(-3dB) | |
EXT Modulation Sensitivity | ≦ 10Vpp 100% modulation | |
FREQUENCY MODULATION | ||
Deviation & Modulation Frequency | - | 0~±50kHz,center at 1MHz, 400Hz fixed(INT), 1kHz fixed(EXT) |
EXT Modulation Sensitivity | ≦ 10Vpp 在 10% modulation (center at 1MHz) | |
FREQUENCY COUNTER | ||
Range | - | 5Hz~150MHz |
Accuracy | Time base accuracy±1位 | |
Time base | ±20ppm(23℃±5℃) after 30 minutes warm up後 | |
Resolution | 100nHz@1Hz, 0.1Hz@100MHz | |
Input Impedance | 1MΩ/150pf | |
Sensitivity | ≦ 35mVrms (5Hz~100MHz) ≦ 45mVrms (100MHz~150MHz) | |
STORE/RECALL FUNCTION | ||
10 groups of panel settings | ||
POWER SOURCE | ||
AC115V±10%, AC 230V+10%/-15%, 50/60Hz | ||
Accessories | ||
User Manual×1 Power Cord x 1 GTL-101 x 1(SFG-2000 Series) GTL-101× 2 (SFG-2110) | ||
DIMENSION & WEIGHT | 266(W)×107(H)×293(D) mm, Approx. 3.2kg |